You don’t have to worry about installing the driver because Windows always have a default diver for input and output devices. You need to uninstall the defective driver and restart the computer to install it again. Since the issue occurs due to a corrupt or incompatible driver, reinstalling the driver is also one of the best ways to fix this issue. Then, turn on the laptop and see if the error is fixed.Press or hold the power button for 15 to 30 seconds.Power off your laptop, then remove the battery if you can.Just do the following steps to power cycle your computer. When a device suddenly stops working, power cycling the computer is one of the ways you can use to get the device working. Once done, check if the error code 10 persists.Īnother solution for this issue is to power cycle the computer.
Once you have disabled the driver, again right-click the defective driver and select Enable device.Once the device manager is opened, right-click the defective driver (showing the error) and select Disable device.Right-click the Start Menu and select Device Manager to open.If the device is not working, but Windows is showing that it is enabled, then disabling and enabling it might fix the issue. In most cases, the error can easily be fixed by disabling and enabling the defective driver. Oftentimes, you could face this error on the network adapter, which your Windows sometimes cannot recognize, or the device stopped working, and as a result, you encounter this error. This error occurs when the device is not properly connected, or there is an incompatible driver installed for the device causing this issue.
0 kommentar(er)
